Ceramic Coatings

 No, Ceramic Pro will not Crack, Peel or Yellow. Our products have undergone SGS testing and real-life testing in some of the worlds harshest environments, and surpassed every one of them. 

 Yes, once Ceramic Pro is applied you will never need to wax again. Cleaning your vehicle’s paint is as easy as maintain as your glass/windshield. No need for abrasive washes or any waxes/sealants. 

 Yes, after Ceramic Pro coating cures is becomes 3 times harder than paint. The coating is much more resistant to scratching. Ceramic Pro is a glass coating, and while glass can still be scratched and chipped, it is much more resistant than your clearcoat. 

 The process of Ceramic Pro will take between 1-3 days depending on the condition of your paint, the size of the vehicle and the packages you select. The 1st step is to wash and prep the vehicle. The 2nd step is to correct all the imperfections in the paint such as swirls and scratches. Once the vehicle is properly prepped, a body shop safe prep solvent will be applied to the entire vehicle to get to bare paint. At this stage the coating process will begin, and each panel of the vehicle will have Ceramic Pro applied, leveled, and stacked to achieve the package you have selected. 

 No, Ceramic Pro will not prevent water spotting, but it WILL allow those pesky waterspots to be easily removed without damaging the surface. Because Ceramic Pro creates a protective layer over the substrate, it does not allow the minerals to corrode or etch the surface that Ceramic Pro is protecting, prolonging the life of your metals, paints, gelcoat, plastics, vinyls etc. Ceramic Pro is a silica based/glass product and the glass on your windshield can still get water spots, but it is much more resistant to water spots than your clearcoat. 

 Yes, Ceramic Pro does an excellent job protecting your chrome/polished finishes from corrosion, oxidation and discoloration. Ceramic Pro’s self-cleaning effect also makes maintenance a breeze. No need to continuously polish your chrome/polished finishes to keep its original luster. 

 No, Ceramic Pro cannot be washed away like a wax or sealant giving it long lasting results. You must use abrasion (wetsand/compound/polish) to remove Ceramic Pro. 

 No, Ceramic Pro is a professional grade product, and must be applied by trained and certified professionals. This product requires a strong attention to detail and an understanding of how solvent based coatings work. 

 That’s the great thing about Ceramic Pro Products. Water and a mild soap or dish soap will do the trick. Good bye harsh chemicals, clay bars, etc. Even glass cleaner or a No Rinse lubricant/wash will work to quickly and easily maintain your coating. 

 You should wait 10-14 days before the 1st wash to allow the solvents to outgas and the coating to fully cure. If you notice that your car gets water spots, bird droppings, tree sap etc. during these two weeks immediately remove it following our care instructions. Keep in mind the coating is softer so work on the paint very gently.